CS WNRF Flange ANSI B 16.9 Class 300
The CS WNRF (Welding Neck Raised Face) Flange ANSI B 16.9 Class 300 is a flange designed for use in piping systems in industrial applications. This type of flange is commonly used in pressurized piping systems and is designed to provide an effective seal between two pipes or between a pipe and a valve. It is commonly used in the oil, gas, and chemical industries.
The CS WNRF flange ANSI B 16.9 Class 300 is designed to meet the standards set forth in the American National Standards Institute (ANSI) for dimensions and tolerances for pressure-containing flanges and flanged fittings. The flange is also designed to meet Class 300 design requirements, and it is made of carbon steel materials. This specific class is appropriate for applications with a temperature between -29°C and 540°C and pressure between 276 and 1814 kPa.
The lengths of the flange range from 4in to 12in, and the nominal bore sizes range from 2in to 8in. The body of the flange is welded, and the connection consists of a weld neck and raised face (RF) with a bore diameter which is greater than the pipe’s bore diameter. The face of the flange is flat and the bore is circular. The surface of the WNRF flange has a raised ridge around the circumference of the bore on the face side, and this ridge serves to provide a compression seal between the flange and mating pipes or valves.
The CS WNRF flange ANSI B 16.9 class 300 is also designed to have a corrosion resistance in temperatures up to 540°C. This is achieved through a process which coats the flange with material that acts as a barrier against corrosive agents. This coating is typically a black oxide finish, galvanized steel or some other type of corrosion resistant coating. The flange can also be customized for specific needs such as for higher temperature or higher pressure applications.
The CS WNRF flange ANSI B 16.9 Class 300 is a cost-effective solution for industrial piping and can be used in a variety of applications. It is designed to be highly reliable and provide an effective seal for high pressure piping systems. The flange is designed to meet all of the standards set forth in the ANSI specification, as well as provide a reliable and cost-effective solution for many industrial applications.
FAQs for CS WNRF Flange ANSI B 16.9 Class 300
FAQs for CS WNRF Flange ANSI B 16.9 Class 300
What is a CS WNRF Flange?
A CS WNRF Flange is a Carbon Steel Weld Neck Raised Face Flange that is used to connect pipes, valves, pumps, and other equipment in a piping system.
