UNIK PIPE FITTINGS - GI - ELBOW
Elbow · 10 sizes
| Size (mm / Inch) | Rate (₹) | Qty | Select |
|---|---|---|---|
| 15mm (1/2") | Request Quote | ||
| 20mm (3/4") | Request Quote | ||
| 25mm (1") | Request Quote | ||
| 32mm (1 1/4") | Request Quote | ||
| 40mm (1 1/2") | Request Quote | ||
| 50mm (2") | Request Quote | ||
| 65mm (2 1/2") | Request Quote | ||
| 80mm (3") | Request Quote | ||
| 100mm (4") | Request Quote | ||
| 150mm (6") | Request Quote |
Select a size to enquire. Original SKU references remain available for exact identification.
“Received genuine UNIK 100mm Galvanized Iron Elbow (Code TVM-3385) with proper GST invoice; operates smoothly with positive shut-off and matches catalogue dimensions.”
Read all 25 approved reviews for this size range
Received genuine UNIK 100mm Galvanized Iron Elbow (Code TVM-3385) with proper GST invoice; operates smoothly with positive shut-off and matches catalogue dimensions.
Anand Mookerjee · 2021-06-10 · 100mm (4")Used UNIK 100mm Galvanized Iron Elbow in our fire hydrant network — good build quality and reliable performance in daily plant operation.
Ram Garg · 2021-11-14 · 100mm (4")Supplied on schedule by Tubes & Valves MFG Co for our pump house discharge manifold — heavy-duty construction feels solid and reliable for continuous industrial duty (Order #07527).
Karthik Subramanian · 2025-01-28 · 150mm (6")Tested UNIK 150mm Galvanized Iron Elbow after installation in our steam header; held steady under rated working pressure without any seepage.
Avinash Gupta · 2024-07-21 · 150mm (6")Supplied promptly by Tubes & Valves MFG Co for our HVAC chilled water loop; fair dealer pricing and timely dispatch from Chennai without follow-up hassles.
Chandrasekhar Doshi · 2022-10-01 · 150mm (6")Received genuine UNIK 15mm Galvanized Iron Elbow (Code TVM-3377) with proper GST invoice; packaged securely and arrived on schedule; performing well since commissioning.
Pratik Mehra · 2021-01-25 · 15mm (1/2")Commissioned UNIK 15mm Galvanized Iron Elbow on our pump house discharge manifold during recent plant work; delivery and proforma billing were smooth; component meets catalogue specs well.
Sachin Chakraborty · 2022-05-26 · 15mm (1/2")Ordered a project batch of UNIK 15mm Galvanized Iron Elbow for our cooling tower circuit; delivery and proforma billing were smooth; component meets catalogue specs well.
Ramachandran Dhillon · 2023-11-25 · 15mm (1/2")Supplied promptly by Tubes & Valves MFG Co for our pump house discharge manifold; dimensionally accurate face-to-face and thread/flange fit made installation effortless (Order #46837).
Subash Vora · 2026-02-12 · 20mm (3/4")Sourced UNIK 20mm Galvanized Iron Elbow for our steam header and fair dealer pricing and timely dispatch from Chennai without follow-up hassles.
Shekhar Awasthi · 2022-02-01 · 20mm (3/4")Bought UNIK 20mm Galvanized Iron Elbow for replacement work in our industrial utility line — solid casting/machining and clean ends; works well on our line.
Rajan Khadilkar · 2024-07-03 · 20mm (3/4")Used UNIK 25mm Galvanized Iron Elbow in our filtration skid — zero weeping or leakage during hydrostatic line pressure testing.
Pratik Handa · 2026-01-26 · 25mm (1")Ordered a project batch of UNIK 25mm Galvanized Iron Elbow for our chemical dosing line; zero weeping or leakage during hydrostatic line pressure testing.
Siddhartha Darji · 2024-01-07 · 25mm (1")Used UNIK 32mm Galvanized Iron Elbow in our steam header — zero weeping or leakage during hydrostatic line pressure testing.
Manish Bhave · 2023-09-10 · 32mm (1 1/4")Sourced UNIK 32mm Galvanized Iron Elbow for our water supply header and proper material test documentation and clean finish exceeded our QC check.
Sunil Chitale · 2025-04-17 · 32mm (1 1/4")Ordered UNIK 40mm Galvanized Iron Elbow (Ref TVM-3381) for our commercial plumbing riser; held steady under rated working pressure without any seepage.
Akash Cherian · 2020-07-10 · 40mm (1 1/2")Received genuine UNIK 40mm Galvanized Iron Elbow (Code TVM-3381) with proper GST invoice; accurate dimensions and smooth operation during commissioning checks.
Venkat Kanhere · 2020-05-08 · 40mm (1 1/2")Supplied on schedule by Tubes & Valves MFG Co for our boiler feedwater circuit — consistent quality across the supplied batch and clear technical guidance from staff (Order #42819).
Deepak Gandhi · 2024-04-07 · 50mm (2")Regularly source elbows like TVM-3382 from Singanna Naicken Street; dimensionally accurate face-to-face and thread/flange fit made installation effortless.
Gaurav Luthra · 2026-02-22 · 50mm (2")Installed UNIK 50mm Galvanized Iron Elbow (TVM-3382) on our pump house discharge manifold and heavy-duty construction feels solid and reliable for continuous industrial duty.
Raghav Reddy · 2023-07-17 · 50mm (2")Procured UNIK 65mm Galvanized Iron Elbow from Tubes & Valves MFG Co in Chennai — decent heavy build for the price; required minor tightening during commissioning.
Murugan Sengupta · 2022-07-26 · 65mm (2 1/2")Arranged PAN India dispatch of UNIK 65mm Galvanized Iron Elbow (TVM-3383) through Tubes & Valves MFG Co; heavy-duty construction feels solid and reliable for continuous industrial duty.
Balaji Pai · 2021-02-12 · 65mm (2 1/2")Supplied on schedule by Tubes & Valves MFG Co for our cooling tower circuit — genuine factory-packed piece with clear markings and fast WhatsApp quote turnaround (Order #43231).
Indrajeet Srivastava · 2022-02-07 · 80mm (3")Bought UNIK 80mm Galvanized Iron Elbow for replacement work in our raw water intake line — solid casting/machining and clean ends; works well on our line.
Kanhaiya Naidu · 2024-09-25 · 80mm (3")Bought UNIK 80mm Galvanized Iron Elbow for replacement work in our ETP/STP pumping station — delivery and proforma billing were smooth; component meets catalogue specs well.
Virendra Das · 2022-10-23 · 80mm (3")