Tubes and Valves MFG Co logo
Tubes & Valves MFG Co
Chennai • Industrial Procurement • Since 1980
WHATSAPP UP
Home / Brands / Divine

Divine

125 products listed under this brand / make.

Open Product Finder

Divine logo
VALVE FLANGED ENDS. • CAST-IRON SPRING LOADED SAFETY - Size / variant as per enquiry

VALVE FLANGED ENDS. • CAST-IRON SPRING LOADED SAFETY - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
CHECK VALVE Flanged End Bolted Check- Valves (Fig no. 11 & 12) are manufactured - Size / variant as per enquiry

CHECK VALVE Flanged End Bolted Check- Valves (Fig no. 11 & 12) are manufactured - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
FLANGE END TYPE - Size / variant as per enquiry

FLANGE END TYPE - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
and carefully assembled. Flanges are normally flat - Size / variant as per enquiry

and carefully assembled. Flanges are normally flat - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
high skill. Flanges are normally flat face and - Size / variant as per enquiry

high skill. Flanges are normally flat face and - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
of best quality Cast Iron and with good workmanship. Flanges are - Size / variant as per enquiry

of best quality Cast Iron and with good workmanship. Flanges are - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
DIAMETER OF FLANGES D4> - 50mm (2")

DIAMETER OF FLANGES D4> - 50mm (2")

Flanges • 50mm (2")

View
DIAMETER OF FLANGES D4> - 350mm (14")

DIAMETER OF FLANGES D4> - 350mm (14")

Flanges • 350mm (14")

View
DIAMETER OF FLANGES D4> - 2mm

DIAMETER OF FLANGES D4> - 2mm

Flanges • 2mm

View
DIAMETER OF FLANGES D4> - 400mm (16")

DIAMETER OF FLANGES D4> - 400mm (16")

Flanges • 400mm (16")

View
DIAMETER OF FLANGES D4> - 600mm (24")

DIAMETER OF FLANGES D4> - 600mm (24")

Flanges • 600mm (24")

View
DIAMETER OF FLANGES D4> - 3mm

DIAMETER OF FLANGES D4> - 3mm

Flanges • 3mm

View
DIAMETER OF FLANGES D4> - 800mm

DIAMETER OF FLANGES D4> - 800mm

Flanges • 800mm

View
FLANGES L - 50mm (2")

FLANGES L - 50mm (2")

Flanges • 50mm (2")

View
FLANGES L - 350mm (14")

FLANGES L - 350mm (14")

Flanges • 350mm (14")

View
FLANGES L - 2mm

FLANGES L - 2mm

Flanges • 2mm

View
FLANGES L - 400mm (16")

FLANGES L - 400mm (16")

Flanges • 400mm (16")

View
FLANGES L - 600mm (24")

FLANGES L - 600mm (24")

Flanges • 600mm (24")

View
FLANGES L - 3mm

FLANGES L - 3mm

Flanges • 3mm

View
FLANGES L - 800mm

FLANGES L - 800mm

Flanges • 800mm

View
FLANGES Oct> - 50mm (2")

FLANGES Oct> - 50mm (2")

Flanges • 50mm (2")

View
FLANGES Oct> - 350mm (14")

FLANGES Oct> - 350mm (14")

Flanges • 350mm (14")

View
FLANGES Oct> - 2mm

FLANGES Oct> - 2mm

Flanges • 2mm

View
FLANGES Oct> - 400mm (16")

FLANGES Oct> - 400mm (16")

Flanges • 400mm (16")

View
FLANGES Oct> - 600mm (24")

FLANGES Oct> - 600mm (24")

Flanges • 600mm (24")

View
FLANGES Oct> - 3mm

FLANGES Oct> - 3mm

Flanges • 3mm

View
FLANGES Oct> - 800mm

FLANGES Oct> - 800mm

Flanges • 800mm

View
Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 50mm (2")

Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 50mm (2")

Flanges • 50mm (2")

View
Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 350mm (14")

Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 350mm (14")

Flanges • 350mm (14")

View
Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 2mm

Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 2mm

Flanges • 2mm

View
Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 400mm (16")

Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 400mm (16")

Flanges • 400mm (16")

View
Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 600mm (24")

Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 600mm (24")

Flanges • 600mm (24")

View
Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 3mm

Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 3mm

Flanges • 3mm

View
Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 800mm

Flanges are normally flat faces and drilled as IS: 1536, BS 10 (Any table) DIN & ASA and 11 - 800mm

Flanges • 800mm

View
LENGTH OVER FLANGES L - 50mm (2")

LENGTH OVER FLANGES L - 50mm (2")

Flanges • 50mm (2")

View
LENGTH OVER FLANGES L - 350mm (14")

LENGTH OVER FLANGES L - 350mm (14")

Flanges • 350mm (14")

View
LENGTH OVER FLANGES L - 2mm

LENGTH OVER FLANGES L - 2mm

Flanges • 2mm

View
LENGTH OVER FLANGES L - 400mm (16")

LENGTH OVER FLANGES L - 400mm (16")

Flanges • 400mm (16")

View
LENGTH OVER FLANGES L - 600mm (24")

LENGTH OVER FLANGES L - 600mm (24")

Flanges • 600mm (24")

View
LENGTH OVER FLANGES L - 3mm

LENGTH OVER FLANGES L - 3mm

Flanges • 3mm

View
LENGTH OVER FLANGES L - 800mm

LENGTH OVER FLANGES L - 800mm

Flanges • 800mm

View
OF FLANGES b - 50mm (2")

OF FLANGES b - 50mm (2")

Flanges • 50mm (2")

View
OF FLANGES b - 350mm (14")

OF FLANGES b - 350mm (14")

Flanges • 350mm (14")

View
OF FLANGES b - 2mm

OF FLANGES b - 2mm

Flanges • 2mm

View
OF FLANGES b - 400mm (16")

OF FLANGES b - 400mm (16")

Flanges • 400mm (16")

View
OF FLANGES b - 600mm (24")

OF FLANGES b - 600mm (24")

Flanges • 600mm (24")

View
OF FLANGES b - 3mm

OF FLANGES b - 3mm

Flanges • 3mm

View
OF FLANGES b - 800mm

OF FLANGES b - 800mm

Flanges • 800mm

View
THICKNESS OF FLANGES b - 50mm (2")

THICKNESS OF FLANGES b - 50mm (2")

Flanges • 50mm (2")

View
THICKNESS OF FLANGES b - 350mm (14")

THICKNESS OF FLANGES b - 350mm (14")

Flanges • 350mm (14")

View
THICKNESS OF FLANGES b - 2mm

THICKNESS OF FLANGES b - 2mm

Flanges • 2mm

View
THICKNESS OF FLANGES b - 400mm (16")

THICKNESS OF FLANGES b - 400mm (16")

Flanges • 400mm (16")

View
THICKNESS OF FLANGES b - 600mm (24")

THICKNESS OF FLANGES b - 600mm (24")

Flanges • 600mm (24")

View
THICKNESS OF FLANGES b - 3mm

THICKNESS OF FLANGES b - 3mm

Flanges • 3mm

View
THICKNESS OF FLANGES b - 800mm

THICKNESS OF FLANGES b - 800mm

Flanges • 800mm

View
Tolerence on length ov~r flange "L' - 50mm (2")

Tolerence on length ov~r flange "L' - 50mm (2")

Flanges • 50mm (2")

View
Tolerence on length ov~r flange "L' - 350mm (14")

Tolerence on length ov~r flange "L' - 350mm (14")

Flanges • 350mm (14")

View
Tolerence on length ov~r flange "L' - 400mm (16")

Tolerence on length ov~r flange "L' - 400mm (16")

Flanges • 400mm (16")

View
Tolerence on length ov~r flange "L' - 600mm (24")

Tolerence on length ov~r flange "L' - 600mm (24")

Flanges • 600mm (24")

View
tapered plugs, having been correctly ground and carefl!IIY - Size / variant as per enquiry

tapered plugs, having been correctly ground and carefl!IIY - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
spring is made of spring steel. Machining with - Size / variant as per enquiry

spring is made of spring steel. Machining with - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Operating of the valve generally Hand wheel, cap and different type of gear - 50mm (2")

Operating of the valve generally Hand wheel, cap and different type of gear - 50mm (2")

Industrial Valves • 50mm (2")

View
Operating of the valve generally Hand wheel, cap and different type of gear - 350mm (14")

Operating of the valve generally Hand wheel, cap and different type of gear - 350mm (14")

Industrial Valves • 350mm (14")

View
Operating of the valve generally Hand wheel, cap and different type of gear - 2mm

Operating of the valve generally Hand wheel, cap and different type of gear - 2mm

Industrial Valves • 2mm

View
Operating of the valve generally Hand wheel, cap and different type of gear - 400mm (16")

Operating of the valve generally Hand wheel, cap and different type of gear - 400mm (16")

Industrial Valves • 400mm (16")

View
Operating of the valve generally Hand wheel, cap and different type of gear - 600mm (24")

Operating of the valve generally Hand wheel, cap and different type of gear - 600mm (24")

Industrial Valves • 600mm (24")

View
Operating of the valve generally Hand wheel, cap and different type of gear - 3mm

Operating of the valve generally Hand wheel, cap and different type of gear - 3mm

Industrial Valves • 3mm

View
Operating of the valve generally Hand wheel, cap and different type of gear - 800mm

Operating of the valve generally Hand wheel, cap and different type of gear - 800mm

Industrial Valves • 800mm

View
END GLAND COCK. - Size / variant as per enquiry

END GLAND COCK. - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
VALVES • CAST-IRON GLOBE & ANGLE CHECK - Size / variant as per enquiry

VALVES • CAST-IRON GLOBE & ANGLE CHECK - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
RELIEF VALVES. • CAST-IRON LEVER SAFETY RELIEF VALVES. - Size / variant as per enquiry

RELIEF VALVES. • CAST-IRON LEVER SAFETY RELIEF VALVES. - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
CHECK VALVE - Size / variant as per enquiry

CHECK VALVE - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Check Valves (Fig-12) must be errected horizontally. - Size / variant as per enquiry

Check Valves (Fig-12) must be errected horizontally. - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
SCREWED FEMALE - Size / variant as per enquiry

SCREWED FEMALE - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
ANGLE TYPE GLOBE - Size / variant as per enquiry

ANGLE TYPE GLOBE - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Cast Iron Gland Cock. ( Fig. no. 13 & 14} have a design throghly up fo d,ita - Size / variant as per enquiry

Cast Iron Gland Cock. ( Fig. no. 13 & 14} have a design throghly up fo d,ita - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
GLOBE TYPE) - Size / variant as per enquiry

GLOBE TYPE) - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
HORIZONTAL TYPE GLOBE - Size / variant as per enquiry

HORIZONTAL TYPE GLOBE - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Material of gland cock are Cast Iron with sound. smooth and good ap~eara~t¢'\ - Size / variant as per enquiry

Material of gland cock are Cast Iron with sound. smooth and good ap~eara~t¢'\ - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
OPEN FLOW PATTERN) - Size / variant as per enquiry

OPEN FLOW PATTERN) - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
OPEN FLOW SPRING LOADED - Size / variant as per enquiry

OPEN FLOW SPRING LOADED - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Type. Construction of the valves are cast iron with - Size / variant as per enquiry

Type. Construction of the valves are cast iron with - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
able with open flow pressure erection of the valve - Size / variant as per enquiry

able with open flow pressure erection of the valve - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
assembled. Every cock is hand adjusted and made to withstand continuous and - Size / variant as per enquiry

assembled. Every cock is hand adjusted and made to withstand continuous and - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
generally flat face and drilled as per desired standard. All the valves are - Size / variant as per enquiry

generally flat face and drilled as per desired standard. All the valves are - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
of valve are made of good quality graded cast Iron having - Size / variant as per enquiry

of valve are made of good quality graded cast Iron having - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
open flow type, Globe type & Angle enclosed type. Castings of valve are made of good quality graded cast Iron having - Size / variant as per enquiry

open flow type, Globe type & Angle enclosed type. Castings of valve are made of good quality graded cast Iron having - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
severe service. The cocks are absolutly tight under pressure. All the cocks - Size / variant as per enquiry

severe service. The cocks are absolutly tight under pressure. All the cocks - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
tested hydraulically to 300Ibs. per. sq. inch. (22 kg.(cm2). Valves are - Size / variant as per enquiry

tested hydraulically to 300Ibs. per. sq. inch. (22 kg.(cm2). Valves are - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Cast Iron spring safety Valve (Fig No. ·s., 7 & a, are - Size / variant as per enquiry

Cast Iron spring safety Valve (Fig No. ·s., 7 & a, are - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
GLOBE PATTERN) Lever Safety valves (Fig. 19, 20 &21) are of differentrypes as - Size / variant as per enquiry

GLOBE PATTERN) Lever Safety valves (Fig. 19, 20 &21) are of differentrypes as - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
LEVER SAFETY VALVE . - Size / variant as per enquiry

LEVER SAFETY VALVE . - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Lever Safety valves (Fig. 19, 20 &21) are of differentrypes as - Size / variant as per enquiry

Lever Safety valves (Fig. 19, 20 &21) are of differentrypes as - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
RELIEF VALVE - Size / variant as per enquiry

RELIEF VALVE - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
SPRING LOADED RELIEF VALVE - Size / variant as per enquiry

SPRING LOADED RELIEF VALVE - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
SOLID WEDGE GATE VALVE. - 50mm (2")

SOLID WEDGE GATE VALVE. - 50mm (2")

Industrial Valves • 50mm (2")

View
SOLID WEDGE GATE VALVE. - 1200mm

SOLID WEDGE GATE VALVE. - 1200mm

Industrial Valves • 1200mm

View
DIAMETER OF - 50mm (2")

DIAMETER OF - 50mm (2")

Industrial Valves • 50mm (2")

View
DIAMETER OF - 350mm (14")

DIAMETER OF - 350mm (14")

Industrial Valves • 350mm (14")

View
DIAMETER OF - 2mm

DIAMETER OF - 2mm

Industrial Valves • 2mm

View
☎WARFQ0