Tubes and Valves MFG Co logo
Tubes & Valves MFG Co
Chennai • Industrial Procurement • Since 1980
WHATSAPP UP
Home / Brands / KITZ

KITZ

378 products listed under this brand / make.

Open Product Finder

KITZ logo
Bolt - Size / variant as per enquiry

Bolt - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
Bolt - Size / variant as per enquiry

Bolt - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
Check loosened bolts and leakage at each connection - Size / variant as per enquiry

Check loosened bolts and leakage at each connection - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
Check loosened bolts and leakage at each connection - Size / variant as per enquiry

Check loosened bolts and leakage at each connection - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
Handle Nut - Size / variant as per enquiry

Handle Nut - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
Handle Nut - Size / variant as per enquiry

Handle Nut - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
Next, set another two bolts into the upper mounting - 10mm

Next, set another two bolts into the upper mounting - 10mm

Fasteners & Hardware • 10mm

View
Next, set another two bolts into the upper mounting - 10mm

Next, set another two bolts into the upper mounting - 10mm

Fasteners & Hardware • 10mm

View
Remove the jack bolts, set all bolts around the valve - 10mm

Remove the jack bolts, set all bolts around the valve - 10mm

Industrial Valves • 10mm

View
Remove the jack bolts, set all bolts around the valve - 10mm

Remove the jack bolts, set all bolts around the valve - 10mm

Industrial Valves • 10mm

View
Set two bolts into the lower mounting guides of a valve - 10mm

Set two bolts into the lower mounting guides of a valve - 10mm

Industrial Valves • 10mm

View
Set two bolts into the lower mounting guides of a valve - 10mm

Set two bolts into the lower mounting guides of a valve - 10mm

Industrial Valves • 10mm

View
bolts under line pressure is dangerous. Any residual fluid - Size / variant as per enquiry

bolts under line pressure is dangerous. Any residual fluid - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
bolts under line pressure is dangerous. Any residual fluid - Size / variant as per enquiry

bolts under line pressure is dangerous. Any residual fluid - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
technical advice or to carry out their own study and evaluation to ensure the suitability of - Size / variant as per enquiry

technical advice or to carry out their own study and evaluation to ensure the suitability of - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
technical advice or to carry out their own study and evaluation to ensure the suitability of - Size / variant as per enquiry

technical advice or to carry out their own study and evaluation to ensure the suitability of - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
When mounting valves, set jack bolts under the pipes to - 10mm

When mounting valves, set jack bolts under the pipes to - 10mm

Industrial Valves • 10mm

View
When mounting valves, set jack bolts under the pipes to - 10mm

When mounting valves, set jack bolts under the pipes to - 10mm

Industrial Valves • 10mm

View
Boltings Recommended for Use of Butterfly Valves ■Sizes of Lined Steel Pipes - Size / variant as per enquiry

Boltings Recommended for Use of Butterfly Valves ■Sizes of Lined Steel Pipes - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Boltings Recommended for Use of Butterfly Valves ■Sizes of Lined Steel Pipes - Size / variant as per enquiry

Boltings Recommended for Use of Butterfly Valves ■Sizes of Lined Steel Pipes - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
KITZ Corporation for technical advice, or to carry out their own study - Size / variant as per enquiry

KITZ Corporation for technical advice, or to carry out their own study - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
KITZ Corporation for technical advice, or to carry out their own study - Size / variant as per enquiry

KITZ Corporation for technical advice, or to carry out their own study - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
Thrust Washer Forged Brass (B283 No. C37700)/Cast Bronze (B584 No. C84400) - Size / variant as per enquiry

Thrust Washer Forged Brass (B283 No. C37700)/Cast Bronze (B584 No. C84400) - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
Thrust Washer Forged Brass (B283 No. C37700)/Cast Bronze (B584 No. C84400) - Size / variant as per enquiry

Thrust Washer Forged Brass (B283 No. C37700)/Cast Bronze (B584 No. C84400) - Size / variant as per enquiry

Fasteners & Hardware • Size / variant as per enquiry

View
DBBV AND MICRO MAKE #150 & #300 BALL VALVE Flanged End - 40mm (1 1/2")

DBBV AND MICRO MAKE #150 & #300 BALL VALVE Flanged End - 40mm (1 1/2")

Industrial Valves • 40mm (1 1/2")

View
DBBV AND MICRO MAKE #150 & #300 BALL VALVE Flanged End - 65mm (2 1/2")

DBBV AND MICRO MAKE #150 & #300 BALL VALVE Flanged End - 65mm (2 1/2")

Industrial Valves • 65mm (2 1/2")

View
DBBV AND MICRO MAKE #150 & #300 BALL VALVE Flanged End - 40mm (1 1/2")

DBBV AND MICRO MAKE #150 & #300 BALL VALVE Flanged End - 40mm (1 1/2")

Industrial Valves • 40mm (1 1/2")

View
DBBV AND MICRO MAKE #150 & #300 BALL VALVE Flanged End - 65mm (2 1/2")

DBBV AND MICRO MAKE #150 & #300 BALL VALVE Flanged End - 65mm (2 1/2")

Industrial Valves • 65mm (2 1/2")

View
Make sure to use blind flanges when butterfly valves are - Size / variant as per enquiry

Make sure to use blind flanges when butterfly valves are - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Make sure to use blind flanges when butterfly valves are - Size / variant as per enquiry

Make sure to use blind flanges when butterfly valves are - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Flange - Size / variant as per enquiry

Flange - Size / variant as per enquiry

Flanges • Size / variant as per enquiry

View
Flange - Size / variant as per enquiry

Flange - Size / variant as per enquiry

Flanges • Size / variant as per enquiry

View
Flanged End - 40mm (1 1/2")

Flanged End - 40mm (1 1/2")

Flanges • 40mm (1 1/2")

View
Flanged End - 65mm (2 1/2")

Flanged End - 65mm (2 1/2")

Flanges • 65mm (2 1/2")

View
Flanged End - 40mm (1 1/2")

Flanged End - 40mm (1 1/2")

Flanges • 40mm (1 1/2")

View
Flanged End - 65mm (2 1/2")

Flanged End - 65mm (2 1/2")

Flanges • 65mm (2 1/2")

View
Flanges and pipe bores must be cleaned thoroughly to re - 10mm

Flanges and pipe bores must be cleaned thoroughly to re - 10mm

Flanges • 10mm

View
Flanges and pipe bores must be cleaned thoroughly to re - 10mm

Flanges and pipe bores must be cleaned thoroughly to re - 10mm

Flanges • 10mm

View
The edges of welded flanges must be machined to ach - 10mm

The edges of welded flanges must be machined to ach - 10mm

Flanges • 10mm

View
The edges of welded flanges must be machined to ach - 10mm

The edges of welded flanges must be machined to ach - 10mm

Flanges • 10mm

View
Valves must be mounted on flanges only after flanges - 10mm

Valves must be mounted on flanges only after flanges - 10mm

Industrial Valves • 10mm

View
Valves must be mounted on flanges only after flanges - 10mm

Valves must be mounted on flanges only after flanges - 10mm

Industrial Valves • 10mm

View
and mount it carefully so that the flange faces do not dam - 10mm

and mount it carefully so that the flange faces do not dam - 10mm

Flanges • 10mm

View
and mount it carefully so that the flange faces do not dam - 10mm

and mount it carefully so that the flange faces do not dam - 10mm

Flanges • 10mm

View
contact between the valve disc and the flanges. - 10mm

contact between the valve disc and the flanges. - 10mm

Industrial Valves • 10mm

View
contact between the valve disc and the flanges. - 10mm

contact between the valve disc and the flanges. - 10mm

Industrial Valves • 10mm

View
flange-to-flange distance to allow 6 to 10 mm of space on - 10mm

flange-to-flange distance to allow 6 to 10 mm of space on - 10mm

Flanges • 10mm

View
flange-to-flange distance to allow 6 to 10 mm of space on - 10mm

flange-to-flange distance to allow 6 to 10 mm of space on - 10mm

Flanges • 10mm

View
leakage through the valve and flange connections. Gas - 10mm

leakage through the valve and flange connections. Gas - 10mm

Industrial Valves • 10mm

View
leakage through the valve and flange connections. Gas - 10mm

leakage through the valve and flange connections. Gas - 10mm

Industrial Valves • 10mm

View
the flanges come into contact with the valve body (Fig. 3). - 10mm

the flanges come into contact with the valve body (Fig. 3). - 10mm

Industrial Valves • 10mm

View
the flanges come into contact with the valve body (Fig. 3). - 10mm

the flanges come into contact with the valve body (Fig. 3). - 10mm

Industrial Valves • 10mm

View
the resilient seats during valve mounting. Flange faces - 10mm

the resilient seats during valve mounting. Flange faces - 10mm

Industrial Valves • 10mm

View
the resilient seats during valve mounting. Flange faces - 10mm

the resilient seats during valve mounting. Flange faces - 10mm

Industrial Valves • 10mm

View
valves in place of blind flanges. - Size / variant as per enquiry

valves in place of blind flanges. - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
valves in place of blind flanges. - Size / variant as per enquiry

valves in place of blind flanges. - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Boltings used for other than cast iron flanges) - Size / variant as per enquiry

Boltings used for other than cast iron flanges) - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Boltings used for other than cast iron flanges) - Size / variant as per enquiry

Boltings used for other than cast iron flanges) - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Flange - Size / variant as per enquiry

Flange - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Flange - Size / variant as per enquiry

Flange - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
For vinyl chloride-lined steel pipes, the flange sizes must be larger - Size / variant as per enquiry

For vinyl chloride-lined steel pipes, the flange sizes must be larger - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
For vinyl chloride-lined steel pipes, the flange sizes must be larger - Size / variant as per enquiry

For vinyl chloride-lined steel pipes, the flange sizes must be larger - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
TSflange - Size / variant as per enquiry

TSflange - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
TSflange - Size / variant as per enquiry

TSflange - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Welded flange - Size / variant as per enquiry

Welded flange - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Welded flange - Size / variant as per enquiry

Welded flange - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
ded. Valve-to-flange centering work must always be done accurately - Size / variant as per enquiry

ded. Valve-to-flange centering work must always be done accurately - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
ded. Valve-to-flange centering work must always be done accurately - Size / variant as per enquiry

ded. Valve-to-flange centering work must always be done accurately - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
flange sizes are needed. - Size / variant as per enquiry

flange sizes are needed. - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
flange sizes are needed. - Size / variant as per enquiry

flange sizes are needed. - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
for valve mounting on pipelines. For vinyl chloride-lined steel pipes, the flange sizes must be larger - Size / variant as per enquiry

for valve mounting on pipelines. For vinyl chloride-lined steel pipes, the flange sizes must be larger - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
for valve mounting on pipelines. For vinyl chloride-lined steel pipes, the flange sizes must be larger - Size / variant as per enquiry

for valve mounting on pipelines. For vinyl chloride-lined steel pipes, the flange sizes must be larger - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
nected with welded pipe flanges as shown in the illustration to the - Size / variant as per enquiry

nected with welded pipe flanges as shown in the illustration to the - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
nected with welded pipe flanges as shown in the illustration to the - Size / variant as per enquiry

nected with welded pipe flanges as shown in the illustration to the - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
the weight of KITZ's conventional cast-iron butterfly valves) eases valve-to-flange - of service applications

the weight of KITZ's conventional cast-iron butterfly valves) eases valve-to-flange - of service applications

Industrial Valves • of service applications

View
the weight of KITZ's conventional cast-iron butterfly valves) eases valve-to-flange - of service applications

the weight of KITZ's conventional cast-iron butterfly valves) eases valve-to-flange - of service applications

Industrial Valves • of service applications

View
Easy valve-to-flange centering - of service applications

Easy valve-to-flange centering - of service applications

Industrial Valves • of service applications

View
Easy valve-to-flange centering - of service applications

Easy valve-to-flange centering - of service applications

Industrial Valves • of service applications

View
Gasketless flange sealing contact for easy valve mounting. - Size / variant as per enquiry

Gasketless flange sealing contact for easy valve mounting. - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Gasketless flange sealing contact for easy valve mounting. - Size / variant as per enquiry

Gasketless flange sealing contact for easy valve mounting. - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
OPERATION LEVER , CONNECTION FLANGED - 65mm (2 1/2")

OPERATION LEVER , CONNECTION FLANGED - 65mm (2 1/2")

Flanges • 65mm (2 1/2")

View
OPERATION LEVER , CONNECTION FLANGED - 15mm (1/2")

OPERATION LEVER , CONNECTION FLANGED - 15mm (1/2")

Flanges • 15mm (1/2")

View
OPERATION LEVER , CONNECTION FLANGED - 65mm (2 1/2")

OPERATION LEVER , CONNECTION FLANGED - 65mm (2 1/2")

Flanges • 65mm (2 1/2")

View
OPERATION LEVER , CONNECTION FLANGED - 15mm (1/2")

OPERATION LEVER , CONNECTION FLANGED - 15mm (1/2")

Flanges • 15mm (1/2")

View
provided with ISO 5211 valve mounting flanges. - of service applications

provided with ISO 5211 valve mounting flanges. - of service applications

Industrial Valves • of service applications

View
provided with ISO 5211 valve mounting flanges. - of service applications

provided with ISO 5211 valve mounting flanges. - of service applications

Industrial Valves • of service applications

View
Coupling flanges Class - chart on page 3 and precautions on page 14 for details

Coupling flanges Class - chart on page 3 and precautions on page 14 for details

Fire Fighting Equipment • chart on page 3 and precautions on page 14 for details

View
Coupling flanges Class - chart on page 3 and precautions on page 14 for details

Coupling flanges Class - chart on page 3 and precautions on page 14 for details

Fire Fighting Equipment • chart on page 3 and precautions on page 14 for details

View
Carbon Steel ★4/Ductile Iron ★5 Carbon Steel - Size / variant as per enquiry

Carbon Steel ★4/Ductile Iron ★5 Carbon Steel - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Carbon Steel ★4/Ductile Iron ★5 Carbon Steel - Size / variant as per enquiry

Carbon Steel ★4/Ductile Iron ★5 Carbon Steel - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Carbon Steel - Size / variant as per enquiry

Carbon Steel - Size / variant as per enquiry

Pipe Fittings • Size / variant as per enquiry

View
Carbon Steel - Size / variant as per enquiry

Carbon Steel - Size / variant as per enquiry

Pipe Fittings • Size / variant as per enquiry

View
prevent bending of valve necks and reduce valve and - 10mm

prevent bending of valve necks and reduce valve and - 10mm

Industrial Valves • 10mm

View
prevent bending of valve necks and reduce valve and - 10mm

prevent bending of valve necks and reduce valve and - 10mm

Industrial Valves • 10mm

View
Do not mount valves on the downstream sides of elbows - 10mm

Do not mount valves on the downstream sides of elbows - 10mm

Industrial Valves • 10mm

View
Do not mount valves on the downstream sides of elbows - 10mm

Do not mount valves on the downstream sides of elbows - 10mm

Industrial Valves • 10mm

View
Don,t apply any external force counterclockwise to the valve cap. It - Size / variant as per enquiry

Don,t apply any external force counterclockwise to the valve cap. It - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
Don,t apply any external force counterclockwise to the valve cap. It - Size / variant as per enquiry

Don,t apply any external force counterclockwise to the valve cap. It - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
may affect the assembly of valve body to cap, and cause external - Size / variant as per enquiry

may affect the assembly of valve body to cap, and cause external - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
may affect the assembly of valve body to cap, and cause external - Size / variant as per enquiry

may affect the assembly of valve body to cap, and cause external - Size / variant as per enquiry

Industrial Valves • Size / variant as per enquiry

View
☎WARFQ0