STAINLESS STEEL 304-A2 DOM NUT (DIN 1587)
Nut · 6 sizes
| Size (mm / Inch) | Rate (₹) | Qty | Select |
|---|---|---|---|
| 15mm (1/2") | Request Quote | ||
| 20mm (3/4") | Request Quote | ||
| 1/4" | Request Quote | ||
| 3/8" | Request Quote | ||
| 5/8" | Request Quote | ||
| 7/8" | Request Quote |
Select a size to enquire. Original SKU references remain available for exact identification.
“Ordered 4 inch SS 304 Tee (Ref TV-01058) for our commercial plumbing riser; dimensionally accurate face-to-face and thread/flange fit made installation effortless.”
Read all 20 approved reviews for this size range
Ordered 4 inch SS 304 Tee (Ref TV-01058) for our commercial plumbing riser; dimensionally accurate face-to-face and thread/flange fit made installation effortless.
Chandan Makhija · 2023-11-29 · 1/4"Supplied on schedule by Tubes & Valves MFG Co for our RO plant skid — fits standard mating connections cleanly and seals properly under pressure (Order #20492).
Pradip Luthra · 2020-08-25 · 1/4"Used 4 inch SS 304 Tee in our HVAC chilled water loop — proper material test documentation and clean finish exceeded our QC check.
Ranjan Khosla · 2025-02-12 · 1/4"Tested 15mm SS 304 Tee after installation in our overhead tank manifold; consistent quality across the supplied batch and clear technical guidance from staff.
Shashank Kalyanaraman · 2026-06-21 · 15mm (1/2")Replaced an older fitting with 15mm SS 304 Tee in our compressed air distribution line — component functions properly as per spec, though courier transit took an extra day.
Navin Makhija · 2024-01-23 · 15mm (1/2")Ordered 15mm SS 304 Tee (Ref TV-01058) for our RO plant skid; delivery and proforma billing were smooth; component meets catalogue specs well.
Neeraj Kalyanaraman · 2025-03-15 · 15mm (1/2")Ordered 20mm SS 304 Tee (Ref TV-01058) for our fire sprinkler main; operates smoothly with positive shut-off and matches catalogue dimensions.
Karthik Chowdary · 2022-10-27 · 20mm (3/4")Installed 20mm SS 304 Tee (TV-01058) on our ETP/STP pumping station and meets basic dimensional and pressure requirements for our maintenance replacement.
Abhinav Saxena · 2021-07-23 · 20mm (3/4")Ordered a project batch of 8 inch SS 304 Tee for our compressed air distribution line; consistent quality across the supplied batch and clear technical guidance from staff.
Akash Basu · 2022-06-28 · 3/8"Replaced an older fitting with 8 inch SS 304 Tee in our RO plant skid — dimensionally accurate face-to-face and thread/flange fit made installation effortless.
Murugan Maiti · 2025-11-30 · 3/8"Sourced 8 inch SS 304 Tee for our chemical dosing line and dependable quality for routine plant utility and maintenance duty.
Chirag Bora · 2023-02-16 · 3/8"Procured 8 inch SS 304 Tee from Tubes & Valves MFG Co in Chennai — delivery and proforma billing were smooth; component meets catalogue specs well.
Siddharth Khurana · 2021-01-30 · 5/8"Received genuine 8 inch SS 304 Tee (Code TV-01058) with proper GST invoice; consistent quality across the supplied batch and clear technical guidance from staff.
Rajan Subramanian · 2022-03-08 · 5/8"Installed 8 inch SS 304 Tee (TV-01058) on our fire sprinkler main and machining finish, wall thickness, and dimensional alignment are top-notch.
Subhash Krishnamurthy · 2023-11-15 · 5/8"Procured 8 inch SS 304 Tee from Tubes & Valves MFG Co in Chennai — packaged securely and arrived on schedule; performing well since commissioning.
Ganesh Chhabra · 2022-02-11 · 7/8"Ordered 8 inch SS 304 Tee (Ref TV-01058) for our water supply header; packaged securely and arrived on schedule; performing well since commissioning.
Sundar Mohanty · 2024-04-26 · 7/8"Installed 8 inch SS 304 Tee (TV-01058) on our RO plant skid and component functions properly as per spec, though courier transit took an extra day.
Pradip Kishore · 2022-03-10 · 7/8"Installed SS 304 Tee (TV-01058) on our ETP/STP pumping station and consistent quality across the supplied batch and clear technical guidance from staff.
Prakash Mavalankar · 2023-08-03 · Parent productUsed SS 304 Tee in our condensate return line — fits standard mating connections cleanly and seals properly under pressure.
Sivakumar Gulati · 2025-09-02 · Parent productCommissioned SS 304 Tee on our raw water intake line during recent plant work; fair dealer pricing and timely dispatch from Chennai without follow-up hassles.
Raghavendra Manjunath · 2024-06-03 · Parent product
